2 original mini2 battery: remove the motherboard, remove the shell and replace it with a larger battery, and replace it with DJI’s air2 battery, which is 3800 mA. In the area of technology and quality, we have been striving for excellence: special materials are used for drawing belts for life; 99% high purity lead-free solder wire is used for full welding, and the solder joints are full of luster and never fall off. The battery is equipped with T-shaped positioning insulation cotton inside, which keeps the air duct inside the fuselage, isolates the heat of the main board, and fills the gap of the UAV battery compartment. There is no need to rotate the battery to aim at the tail plug of the UAV. The endurance time: when there is no wind, the S-gear rocker is pulled for about 20 minutes, the ordinary rocker is pulled for about 30 minutes, and it can fly for 15-20 kilometers, hovering in situ for about 40 minutes.

Attention: special charging equipment for DJI must be used

Dajiang mini2 modified battery 4100mah with battery panel protective shell

The hover time is 44~46 minutes, and the flight time limit can be more than 50 minutes (requires technology and good weather and environment). The chainsaw test mileage is 20km, the height is 149m, and the remaining 18% electricity is for reference.

The 4.25V low-voltage version of the cell, mini3 high-capacity cell, has a larger capacity, overcharged to 4.4V, and the measured value exceeds 4100mAh. Because it is overcharged, it is better to use it immediately when it is fully charged. Large capacity, saw artifact.

The battery is charged in the same way as the original one. Both the charging steward and the airplane can be charged. APP can be upgraded at will. Don’t put it with sharp objects to avoid piercing the battery. Save 50% of the battery for longer life.