2Inch

This item: AVAN Blur 2 inch prop 1set(2CW2CCW)
EMAX RS1106 4500KV
6000KV 7500KV Micro Brushless Motor CCW for FPV Racer
F3 Magnum Mini Tower
System including 3-4S BLheli_S Bullet 12A 4 in 1 ESC and F3 Flight
Controller
Emax Babyhawk-R RACE(R) Edition 112mm F3 Magnum Mini 5.8G FPV
Racing RC Drone 3S/4S BNF
Mini Magnum 2 – F4 BLHELI32 35amp 6S

The
Emax Avan Blur propeller 2×1.9×3 was designed for Babyhawk Race 2 inch to
maximize flight time and durability of the propeller without losing performance.
This propeller is matched to Emax 1106 6000kv on 3s and 4s.  A true 1.9" pitch
throughout the blade gives a linear control feeling across the throttle band
while still achieving high speeds. This allows for ease of flight and more
precision. With a special PC blend the Avan Blur weighs 1.1 grams. Utilizing
thicker airfoils greatly increases durability and stiffness. The hub diameter is
also increased to thicken the root chord maximizing durability. Most of the
weight is centralized near the hub creating a low moment of inertia of 0.77 
grams*square centimeter which in turn makes a very responsive prop.

The
Avan Blur was designed from the ground up starting from design constraints such
as RPM, air speed, and required thrust. From these constraints aerodynamic
models were built to predict performance and to design the blade shape. Highly
cambered airfoils were used to achieve high lift coefficients at high angles of
attack prolonging stall. This allows for a higher blade angle while still
remaining efficient. The cambered airfoils also allow a greater flight envelope
making for great low end responsiveness while still being able to achieve high
speeds.

A special Polycarbonate blend is used to achieve high durability.
This material is incredibly tough and ductile to resist fracture in high impact
crashes. A thick blade root was designed to further increase this durability.
Our injection mold process is optimized to reduce bubbles in the plastic to
increase the strength of the propeller and to maintain superb
balance.

Pre-order AVAN Blur 2 inch prop

Geometry:
2
inch diameter
1.9 inch pitch
3 blades

Inertial
Properties:
weight: 1.1 grams
Moment of Inertia: 0.77 g*cm^2

2.5 Inch

The Emax Avan Rush propeller 2.5×1.9×3 was designed for Babyhawk Race
2.5 inch conversion kit to maximize performance and flight time. This propeller
is matched to Emax 1106 4500kv for 4s or the Emax 1106 6000kv on 3s.  A true
1.9" pitch throughout the blade gives a linear control feeling across the
throttle band while still achieving high speeds. This allows for ease of flight
and more precision. With a special PC blend the Avan Mini weighs 1.25 grams.
Utilizing thicker airfoils greatly increases durability and stiffness. Most of
the weight is centralized near the hub creating a low moment of inertia of 1.24 
grams*square centimeter which in turn makes a very responsive prop.

The
Avan Rush was designed from the ground up starting from design constraints such
as RPM, air speed, and required thrust. From these constraints aerodynamic
models were built to predict performance and to design the blade shape. Highly
cambered airfoils were used to achieve high lift coefficients at high angles of
attack prolonging stall. This allows for a higher blade angle while still
remaining efficient. The cambered airfoils also allow a greater flight envelope
making for great low end responsiveness while still being able to achieve high
speeds.

A special Polycarbonate blend is used to achieve high durability.
This material is incredibly tough and ductile to resist fracture in high impact
crashes. A thick blade root was designed to further increase this durability.
Our injection mold process is optimized to reduce bubbles in the plastic to
increase the strength of the propeller and to maintain superb
balance.

AVAN Rush 2.5 inch prop

Geometry:
2.5 inch
diameter
1.9 inch pitch
3 blades

Inertial Properties:
weight:
1.4 grams
Moment of Inertia: 1.24 g*cm^2