Following the great success of the iFlight ProTek series, we are pleased to introduce another representative to you. Model ProTek25 Pusher!

The model is specially designed for pilots who need a small weight, but high strength, maximum performance, but larger range and flight time.

We have done a lot of work to create the best lightweight 2.5-inch quadcopter on the market.

Movies and lightweight crystals-that’s what makes this quadcopter feel like home. He got into the smallest crack, chased skateboarders, or just played in the backyard. Our iFlight bracket kit for Hero8 TPU should be the perfect complement to get a good lens from anywhere.

Strong aerodynamic shell made of polypropylene and carbon two-component frame structure

Only eight screws are used to separate the main plastic shell from the carbon frame, engine and electronic equipment. Quick, simple and cheap maintenance or setup!

Reverse design of “bulldozer” style to increase thrust and efficiency

The screw can move without any interference to the frame or wires; The flight time is prolonged, the noise is reduced, and the screw is reduced!

The powerful XING 1404 engine provides power for your GoPro head.

Lightweight, efficient, and maximize its size; Unlimited cruising and acrobatic flying have enough traction!

Weight less than 250g, including 4S650mAh battery and Blue Hero8.

This drone belongs to the category of less than 250 grams, so you can use it in most countries without a license and registration!

Flight time:

Battery: iFlight Fullsend 4S

GoPro bare metal: 650mah 3-5min, 850mah 4-6min.

Without gopro: 650mah5-7min, 850mah6-8min.

Features:

High performance Whoop AIO F4 V1.1 AIO, saving weight and space.

Digital HD system Caddx Polar Vista

Bart Smooth 1404 4600KV

ProTek25 Pusher BNF specification:

Label: Whoop AIO F4 V1.1 AIO

Engine model: XING 1404 4600KV

Wheel base: 108mm

Shell size: 76.3 * 76.3mm.

Roof thickness: 3mm

Distance between top plate and bottom plate: 21 mm (height of aluminum plate)

Propeller size: 2.5 inches

FC template: 25.5*25.5 mm/20*20 mm

FPV camera spacing: 20 mm

Weight: 143.8g (excluding battery)

ProTek25 PusherHD Quad BNF component

Pre-assembled and tested quadcopter

Model: ProTek25 Pusher Frame

1x Caddx Polar Vista digital HD system

1 x iflight sigmipex/ufllhcp 5.8g antenna

2 x iFlight Nazgul 2525 propeller (4 sets-colors may vary)

Model: TPU 650mah Battery Holder

FC + ESC AIO // Whoop AIO F4 V1.1 AIO

Size: 30.5 * 30.5mm.

Installation template: 25.5*25.5mm/φ3mm.

Weight: 7.4 grams

Interface: Micro-USB

Model: STM32F411

Gyroscope: BMI270

Black box: 8MB

Output BEC:5V 2A

INA pad:nR2

Barometer: No.

Dc current: 20A,25A(Burst)

Input: 2-4S

Current sensor: Yes.

BLHeli: BLHeli-S

Telemetry ESC: No.

Target firmware: IFLIGHT_F411_PRO

ESC firmware: Q-H-15 /Bluejay Q-H-50 (Bluejay)

Commando8 technical specifications:

ELRS: ExpressLRS 915MHz or 2.4GHz (built-in radio back end)

915 MHz system: SX1276

2.4 GHz system: SX1280

Antenna options:

Single frequency (915 MHz)

Single carrier (2.4 GHz)

Management interface:

2 x 2 position switch (which can be used to set protection); Not short-term)

2 5-axis menu buttons for full control of OpenTX or EdgeTX.

2 3-position switches

Radio frequency power:

ExpressLRS 915 MHz // Maximum output power is 1000 mW.

ExpressLRS 2.4 GHz // Maximum output power is 500 mW.

Input: miniature high precision Hall bearing with NMB bearing.

Battery: 1S2P 18650 battery capacity 4000mAh

Charging: fast charging Type-C 20W

Charging interface: Type-C

Radio channel: 8

Weight: 310g

Complete sets of components and parts

2 x iFlight Nazgul 2525 propeller (4 sets-colors may vary)

1 x iFlight ProTek25 Pusher BNF

1x 15x150mm battery strtap

1x 15x180mm battery strtap

Battery bracket is not included, it needs to be purchased separately!